How to measure and adjust humidity levels in your marijuana grow room? A guide with a schedule for the best humidity levels for your grow. Climate is key to cannabis growing. In this post we analyse the importance of relative air humidity at every growing stage. We’ll define the ideal hygrometric level … So what is the best temperature for growing weed and what about the humidity in your grow room? Check it out!
We are going to take some time to delve into some much-needed information to further your understanding of the importance of humidity for seedlings when growing marijuana plants.
What is humidity
Humidity is expressed as the quantity of water vapor in the air. Humidity plays a necessary role in influencing how much evaporation occurs in cannabis plants.
Your plant will take in more nutrition and water when the humidity is low.
If for any reason the evaporation strain gets to be too much, marijuana plants will guard themselves against scarcity by closing their stomata. So naturally, this will stunt the growth of your plant due to the lack of water absorption.
This is why you must have the proper humidity levels in your marijuana factory. When the plant is in the growth stage, it will need high humidity, unlike the blooming phase.
This is mainly because the roots of baby plants are much smaller. Measure the humidity using a hygrometer. In the first stages of growing your plant, the humidity can be about 70%, and you can reduce it by 5 every week until it gets to 40%. Included in this article is a helpful schedule to assist you with the right information on humidity levels for both indoor and outdoor growing.
Relation to temperature
Before we go any further, we have to discuss the connection between temperature and humidity. First you must understand that the percentage of absorbable water is determined by the temperature. At the temperature of 68 degrees Fahrenheit, air can take in up to 7.2 ml of water. In this case, air has a corresponding humidity of 100%.
With temperatures and humidity such as that you are guaranteed to see absolutely nothing because the water vapor is very high. At 32 degrees Fahrenheit, the air will take in around 5 ml of water. For this reason, air is much drier during the winter time than the summer months.
‘The hotter it is, the more moisture the air could hold at the same temperature.’
Since you will be airing out your grow room quite frequently, you will end up releasing the humidity as well. So you have to be sure that your marijuana factory is always moist so the humidity level goes up. Later in the article you will be informed of options for adjusting the humidity levels.
At first, your marijuana cuttings will have very small roots so they are not able to take in much water yet. At this stage, you want them to evaporate a very small amount of water. Cutting will only evaporate a small amount of water when the humidity is high, and require fewer roots.
Another way to reduce the amount of evaporation is chopping the bigger leaves halfway from the cutting. A humidity of 70% is exactly what you want when putting the cuttings in your marijuana factory.
Planning to grow marijuana plants indoors? Find the best indoor marijuana seeds here.
Buy quality marijuana seeds
- We ship daily to all U.S. states for FREE!
- Our seeds are guaranteed to germinate
- Consistent heavy yields
- Guaranteed delivery
- Get 24/7 grow support
Your cuttings will begin growing roots in a clone box when the temperature is around 71.5 degrees
Fahrenheit in a very humid environment and fluorescent lighting.
I suggest the cuttings go beneath a 600-watt HPS lamp in an environment with 30% humidity for good results.
For as long as the 2 nd or 3 rd week of blooming the roots are going to grow the size of the actual plant. The roots must be durable for proper water and nutrient absorption.
If you’ve produced a bountiful harvest with your desired attributes, cloning these marijuana plants is the next best thing to do so you can recreate the same results.
Seedlings require a separate set of rules since they have a taproot at germination that takes in moisture and grows fairly quickly. Never clip the leaves of a seedling. The leaves are necessary for absorbing light and evaporating water.
To help the seedlings take in water and nutrition through its leaves, have the humidity at high levels. Begin at 60% and slowly work your way down to 40%. Click this link to buy marijuana seeds
As your plant start flowering, you can gradually decrease the humidity level.
At this stage the roots are very mature, so the plant is able to take in the most nutrients and water. You will want to reduce the humidity level in the flowering stage since mold has a tendency to flourish in high humidity environments.
With age, there is a higher chance of your marijuana plant getting mold.
As a result of the high humidity, water gathers around the tops and that when mold has the opportunity to develop. Bud rot is the most frequent type of mold.
Levels of humidity in cannabis plants
Once the plant is fully grown you will need to start thinking about harvest time. Our free little Harvest Guide will help you determine the best moment to cut your plants.
Follow this schedule to ensure you give your plants the right amount of humidity for optimum growth. Notice there is a difference in clones and seedlings.
Clones humidity level
|Growth Week 1||70%|
|Growth Week 2||70%|
|Flowering Week 1||65%|
|Flowering Week 2||60%|
|Flowering Week 3||55%|
|Flowering Week 4||50%|
|Flowering Week 5||50%|
|Flowering Week 6||45%|
|Flowering Week 7||45%|
|Flowering Week 8||40%|
|Flowering Week 9||40%|
Check this complete Marijuana Grow Schedule with temperatures, humidity, watering and nutrients tips.
Seedlings humidity level
|Growth Week 1||60%|
|Growth Week 2||60%|
|Flowering Week 1||55%|
|Flowering Week 2||50%|
|Flowering Week 3||50%|
|Flowering Week 4||50%|
|Flowering Week 5||50%|
|Flowering Week 6||45%|
|Flowering Week 7||45%|
|Flowering Week 8||40%|
|Flowering Week 9||40%|
How to raise the humidity in your grow room
So, you have a few options for raising the humidity in your grow room. For starters, you can try spraying water on the walls and flower.
Also, try putting the lights further up so the temperature will go down a little near the plants. This way you won’t have to turn on the extractor fan as often. If you put bottles or buckets of water around the grow room, or even wet towels, this will raise the humidity level.
How to decrease the humidity
Dehumidifiers are most certainly your best option. It has the capability of taking moisture from the air and draining it or holding it in a reservoir. Make sure to get a larger humidifier because the smaller ones fill up quickly.
Once your marijuana plant starts flowering the humidity will need to be decreased, so it is necessary to dehumidify. Try using the extractor fan on a higher setting than usual or even you can even shoot cold air into the room.
Download my free Grow Bible for more growing tips!
- Grow with my Quick Start Guide
- Discover secrets to Big Yields
- Avoid common grow mistakes
Keep in mind that the humidity outside may influence the humidity in your marijuana factory. For instance, if on a rainy day the humidity increases quickly, you can shut off the extractor fan or turn it to a much lower setting. Make sure the temperature doesn’t rise too quickly because you’re getting less cold air from outside.
How to measure humidity levels
Hygrometers are used to measure humidity levels (wiki on hygrometer at this link). All you have to do is put it over the plants, so long as it is in an area that easily aired out. The analog hygrometers cost $5 and you can buy a digital one for $10.
The higher priced hygrometers are usually of better quality. For ease of use, get the one that has a wire attached to it. This makes it easier to see the humidity without having to turn the lights on in the room. These devices have a built-in storage bank that tracks the highest and lowest values, to help you determine how well you stayed within the preferred range. Buy the best hygrometers at this link.
Watering your plants causes the humidity to go up quite a bit, which is fine when in the growth stage because you just spray the floor and walls to raise the humidity. During the flowering stage, humidity levels often go up way too much after you water your plants.
Once the lights are no longer on in the grow room, the temperature decreases and extracting a lot of hot air is unnecessary, which usually is the cause of humidity increases.
Nourish your plant with water once the lights are on, that way they will evaporate most of the water throughout the day. Understand that spraying water on top of the buds is pointless because you will raise the possibilities of the humidity rising and leading to mold.
Humidity is much less of an issue when growing your cannabis plants outdoors. The springtime and the start of summer offer higher humidity which works just fine since there are no buds present on the plant for moisture to gather. Any moisture on the plant from morning dew will easily evaporate throughout the day.
Once Summertime ends, the flowering stage starts and there is a shift in the climate, resulting in cooler days and more rainfall. This usually makes the humidity higher. In the cooler months, the morning dew could be an issue since the sun is not guaranteed to come out and the temperatures are sometimes too low to evaporate it.
Luckily a tad bit of rain will not cause the buds to rot, but just in case you may want to be on the lookout for this. In the last of the blooming stage, it might be a good idea to brush the dew off your marijuana plants in the mornings. If you notice that rain is expected, go ahead on move your plants to a location where they will be kept dry, away from the rain. It is always best to take the necessary precautions.
Are you ready to take the first step on your marijuana grow journey? Buy high-quality seeds from my seed bank.
What is the optimum humidity level for each stage of cannabis growing?
In order to start growing in the best possible conditions, it is adamant to understand the meaning of this technical term. Relative air humidity levels give us information on the concentration of water vapour in the air.
It is important to realise that air humidity is closely connected to air temperature, as hot air is more humid than cold air.
That’s why an air conditioning unit dehumidifies and cools the air at the same time.
When air humidity levels come close to 100%, the air is not capable of retaining the excess moisture, which leads to condensation in the shape of small droplets of fog, morning dew, or rain.
For instance, if the temperature of your grow space is 30ºC, with a relative humidity of around 33-35%, and the temperature suddenly plummets to 10-12ºC, the humidity level can quickly reach 100%.
This can become a critical situation at the end of the flowering period if the ‘dew point‘ is reached. This is a parameter that reflects the cannabis flowers’ humidity level. Bad management of the relative humidity levels of your grow space, caused by abrupt temperature variations, could lead to the appearance of mould in your buds.
Air circulation for cannabis growing
So what is the most favourable humidity level for each growing stage?
Here we show you the ideal humidity levels for every growing phase of your cannabis grow.
Germination / beginning of the cuttings’ rooting period
It is really important to maintain a relative humidity of 80-90% in your mini greenhouse during this phase. This applies to seeds that have just sprouted and also to young seedlings (0-10 days old). These still don’t have a strong radicular system and are therefore pretty fragile.
They require high moisture levels so they can concentrate all their resources on the development of a strong and vigorous root mass. The correct day temperature should be 25-26ºC, and 21-22ºC at night.
Young seedlings and 10-day-old clones
At this point, the required hygrometric conditions should range between 70 and 80%, with similar temperatures to those in the initial stage.
The moisture level for this phase needs to be quite high as the root mass is not very vigorous and actually non-existant in the case of the young seedlings. That’s why it’s necessary to point all technical parameters towards this objective.
It is essential to maintain the correct relative humidity as cuttings will start to develop their first roots between 12 and 20 days after having been planted in the growing medium. This is a crucial point for the appropriate evolution of these young plants.
At this stage the young seedlings, derived from seeds or cuttings, will have developed a radicular mass that is significant enough for them to feed through and therefore reach their maximum potential before being transplanted to a new pot for further development.
Establishing new climate conditions at this stage is vital as the aim is to achieve a reasonably high humidity level, but slightly lower than at the beginning. A good balance should range between 60 and 70%.
Temperatures must be kept between 22-28ºC during the day and 18-22ºC at night. These conditions guarantee the plants’ well-being and facilitate good metabolic function, as well as overall optimum development.
At this point, the radicular system is strong enough for the plant to absorb a higher amount of nutrients and develop a much more resistant immune system.
At the start of the flowering period, when the ‘stretching’ or the final growth boost occurs, plants need specific climate conditions for this transitional phase.
As this is still a transition period in which plants progressively end the veg phase, the humidity level needs to be set at 50-60%. It is also essential that the temperature remains between 20-26ºC both day and night.
This prevents thermal shock and guarantees that plants will be ready to produce those delicious flowers. It is vital that their well-being is taken care of so they can concentrate all their resources on their final objective: quality and quantity. These measures are valid for the first 3 to 4 weeks of flowering, depending on the strain.
In the second part of the flowering phase the humidity level must be reduced to 40-50%. In the two to three final weeks it’s preferable for this figure to be closer to 40%.
This is absolutely essential, particularly if you’re growing strains that are sensitive to mould or that produce dense flowers.
If you follow our guidelines, chances of botrytis hitting your flowers will be slim. As far as temperature goes, we advise you to stick to 18-24ºC during the day and 17-20ºC at night.
This way you’ll be able to control your flowers’ dew point, which is crucial in order to prevent fungi and avoid ruining all your hard work.
Brian Worms After completing my studies in International Trade and Marketing in France, I’m more interested in the world of communication today. Blogger, grower and real cannabis toker for more than 20 years, always looking into the rarest and finest cannabis genetics. My passion for cannabis is so deep that it’s become something of a lifestyle now… My work is like a dream come true.
- Cannabis activism
- Hot news
- Cannabis Genetics
- Cannabis Growing
- Growing techniques
- Trimming techniques
- Biological prevention
- Organic Growing
- Indoor Growing
- Outdoor Growing
- Grow Reports
- Nutrients and fertilizers
- Medical Cannabis
- Weed Recipes
- Risk reduction
Most popular posts
Can marijuana lead to addiction?
Differences between cannabis and hemp
Cannabis types and varieties
Don’t miss any posts!
Subscribe to our newsletter and stay up-to-date with the latests cannabis news.
Best Temperature and Humidity for Growing Weed
Getting the temperature right for your cannabis plants is an essential part of each stage of the growing process. If the temperature in your grow room or outdoors is too hot or too cold, your young weed plants will not be able to photosynthesise properly, and this will inevitably affect their growth and development. However, it is not as simple as saying ‘this is the correct temperature; the temperature needs of the plants vary according to their stage of development, so you must have some knowledge of their requirements. To help you, we have written this guide which will explain the best temperature and humidity for growing weed for each phase of your young weed plants.
Now, we understand that establishing the ideal temperature for weed plants can be tricky – some say that it is as much instinct as it is science. However, it is certainly possible to work things out for the growing conditions of your plants, and this article will tell you everything you need to know.
What you need to know about temperature and humidity
The first thing you need to understand is the close relationship between temperature and humidity levels. Let’s look at science. Humidity refers to the amount of water vapour present in the air. At higher temperatures, molecules move at top speeds; thus the probability of condensation of water vapour due to the collision of molecules is less. This makes the air hold more water vapour at high temperatures. In other words, as the temperature increases, the humidity of air also increases.
Most plants including cannabis plants, need humid air to thrive. This is because the pores through which they breathe lose most of their moisture when the surrounding air is dry, a loss that the plant can’t always replace through the water absorbed by its roots. The thinner the leaf – and cannabis plants have quite small, narrow leaves, the higher its need for humidity.
When deciding the correct temperature for your plants, therefore, it is also sensible to assess the humidity levels as the two go hand-in-hand. To do this, you should invest in a good-quality thermometer and a hygrometer, ideally digital models with the ability to store historical maximum and minimum levels.
When the temperature is 68°F (20°C), air can absorb 7.2 ml of water maximum. When this occurs, the air has a relative humidity of 100 percent. There will be so much water vapour that the air will be as dense as a cloud and will affect your ability to see anything. Air with a temperature of 32°F (0°C) is only able to absorb about 5 ml of water. This is the reason why the air is a lot drier in the winter than in the summer.
Temperature and humidity for the germination phase
The first moments of your cannabis plant’s life are crucial. Germinating seeds indoors will allow you to have more control over the temperature, but it is also possible to do so outdoors if the climate conditions allow. Having a high temperature (from 22 to 26°C) is an important factor for your seeds to decide to emerge into the world.
However, the temperature must not fall to less than 20 degrees Celsius nor rise to more than 30. If you are using a greenhouse for the germination phase, be warned that it can get sweltering so you must regularly monitor the temperature. Humidity must also be continuously monitored. If the seed trays dry up, germination will not take place or recently sprouted shoots will wither and die. You must not forget to add water when necessary – a spray dispenser is gentle for this, but you should not give them too much water. The seeds should only be soaking wet during the first two days.
Once the first seedlings emerge with two cotyledons (the first two round leaves that develop), they should be carefully transplanted. If the seeds are autoflowering, you should transplant them to a large pot. If they are feminised seeds, however, you can transplant them to a smaller container and move them to the large bowl when they are a bit more established.
Best temperatures and humidity for the seedling phase
The optimal conditions for cannabis seedlings are a sunny, warm (20-25ºC) and humid environment with well-circulated air. Their underdeveloped root systems mean that seedlings need to be exposed to lots of light and heat. Problems arise as their immaturity means that they cannot withstand high temperatures. Therefore, we recommend that growers maintain 20ºC to 25ºC indoor environments when the lights are on.
Humidity levels also need to be high. Levels between 65 percent and 70 percent are sufficient for seedlings to absorb enough water through their leaves.
Optimal temperatures for the vegetative phase
You can start to relax a bit during the vegetative phase. As cannabis plants mature, they grow stronger and better able to cope with extremes of heat. They start to be more resistant to heat and cold. You can raise the temperature to as much as 30ºC.
As the roots have sufficiently developed to absorb plenty of water, you may wish to reduce humidity levels by 5 percent each week. The relative humidity should ideally fall between 40 percent and 70 percent.
The best humidity and temperatures for the flowering phase
The last phase of the cannabis growth cycle is the flowering phase. Growers should aim to maintain warm temperatures that are pretty much the same as when the plants were at the seedling stage. Ensure that the temperature stays at a nice warm 20ºC to 25C to prevent buds from burning their terpenes. This will allow your plants to produce deliciously potent flowers.
It is also a good idea to lower humidity levels to about 40 percent to 50 percent, especially during the late flowering phase. This encourages the production of highly-prized resin and a higher terpene content leading to a more aromatic and flavourful crop.
Cultivators should be advised that typical temperature variance when the lights are switched off is 5ºC, and this applies to all the phases of development.
Temperatures that are too cold
Temperatures that are too cold will slow down a cannabis plant’s metabolism and its roots system will become increasingly ineffective. If temperatures drop below 12 degrees, the plant is even at risk of death.
The obvious solution to boosting the temperature of the grow room is to get an electric heater and plug it in. This has several disadvantages, however, mainly due to its high consumption of electricity but also because of its drying nature which can affect levels of humidity, and the direct distribution of the heat which makes it hard for all the plants to enjoy the uneven heat. An oil-filled portable radiator is another option if you can get one which isn’t too large to fit into the grow space. We recommend small tubular electric heaters which can be placed conveniently on the floor and only use a few watts of electricity. Radiating cables for indoor use are another excellent alternative, especially if you need to heat trays of seedlings.
Temperatures that are too hot
Reducing heat levels in a grow tent can be much harder to control than the reverse. We recommend using electric fans to circulate the air as much as possible to disperse the heat and thus cool the young cannabis plants.
Placing an exhaust fan in the ceiling vent of your grow tent is also highly effective at reducing heat. After all, heat always rises to the top.
You could also use a cooling humidifier which reduces temperatures while boosting humidity levels. Just take care that the humidity does not increase too much for the growth phase. Remember, seedlings need higher levels of humidity than vegetative marijuana plants, for which 40 percent is optimal.