can i set the voltage for cbd oil

Features & Benefits of Variable Voltage Vape Pen Batteries

Are you curious about the features and benefits of variable voltage vape pens? Then you have come to the right place!

It’s never easy to determine what it takes to create the best vaping experience. Sometimes we put a bad vaping experience off and blame it on the thc pen we’re using, but the issue is a lot easier to control than we think.

Variable voltage batteries allow you to adjust your settings to suit whatever it is you’re vaping rather than be limited to one specific setting for different cannabis extracts. In the following article, we’re going to take a much closer look at essential oil vape pen batteries and how they could change your vaping experience for the better!

What Is The Difference Between Wattage And Voltage THC Pens?

Both variable voltage and variable wattage control the battery to create whatever desired vaping effect you’re looking for but in different ways. Volts measure the input of energy into a vaping device, while watts measure the output of energy.

When you have a variable voltage battery, you set the number of volts to determine what the final temperature will be. With variable wattage, you’re setting the watts and allowing the weed pen to adjust the voltage accordingly.

While it may be a small difference, it can still have a big impact on your vaping experience. A variable voltage vape pen will allow you to have much more precise control over your vaping experience. It allows you to produce more flavor or vapor, depending on what you are looking for.

What Are Variable Voltage Vape Pen Batteries?

A variable voltage weed vape battery will allow any user to adjust the heating power of the vaporizer. This means that you’ll be able to control the exact temperature of the vaping device. Variable voltage thc pens are used to control temperature, giving you the ability to enhance flavor, increase or decrease intensity, smoothness, and also the harshness of the hit.

What Is Variable Voltage?

A variable voltage vape battery will allow you to control the voltage at which the battery inside the THC pen operates, regardless of how much power you have left in your battery. What this means is that you will have more precise control over the temperature at which you are vaping and ultimately have a better experience with more flavor.

What Could A Variable Voltage Vape Pen Battery Control?

The easiest way to explain it is that a variable voltage pen battery allows you to set the voltage; the higher you set your voltage, the more heat it creates, which will produce a more intense vaping experience. And vice versa, a lower voltage setting will lessen the intensity.

In addition, when setting your variable voltage battery on a lower setting, it can allow some of the more subtle flavors present to be more noticeable. These subtle flavors might not be as noticeable if you were vaping at much higher heats, where flavor profiles tend to blur or become mixed together.

Different extracts have different heating points, with no two cannabis oils being exactly the same each time. When you are adjusting your voltage using a variable voltage vape pen, it’s not about trying to land on a certain voltage specifically. Rather, you should be adjusting the voltage until you find the perfect balance that suits your personal flavor and intensity preferences. Sure, there is a broad range that will get you close, but then it will take a little bit of fine-tuning to land exactly where you want to land.

Why Would A Vape Pen Have A Variable Voltage Battery?

Whenever you are using weed pens, and you adjust either the voltage or watts on the vaporizer, it’s not watts or volts that you are looking to adjust. You’re actually trying to adjust those settings to achieve more flavor, less flavor, a more intense or less intense vaping experience, all of which lead to creating the ultimate vaping experience for you.

The variable voltage vape pen allows you to make these changes rather than relying on the factory preset of the device that you are using. Many vape pens on the market today allow you to adjust the voltage to achieve your perfect vaping experience.

Which Voltage Should You Vape At With Your Variable Voltage Vape Pen Battery?

There is no straightforward and complete answer to this question as there are a bunch of variables that will all affect the answer. The first of these variables are individual preferences.

No two people are the same, and you can guarantee that people like to vape at different temperatures. Some people like to vape really hot and have an intense vaping session, while others prefer a much slower session with less intense heat.

However, once you find your variable voltage range, you’ll be able to narrow down what voltage you want to vape at quickly. Even with a broad range of voltage settings, you’ll quickly be able to narrow down the exact numbers you need.

Another factor that you need to consider is the quality of the cannabis concentrates you are vaping with your thc pen. No two extracts are the same, with strain quality and processing techniques playing a particularly important role in finding the right temperature range. Even if you buy the same type of thc vape cartridge, again and again, it’s never going to be 100% the same, as growing, trimming, and production will all vary. Even environmental conditions can affect your settings slightly.

What’s The Best Voltage Setting For Your Vape Pen?

In this section, we’ll take a look at some of the common variable voltage battery settings so you can quickly narrow down on potential settings. A common setting range is between 3.3 volts and 4.8 volts, but remember, the ultimate setting that you choose will be up to you and suit your personal preferences rather than a recommended setting.

It’s important to remember that volts control the temperature of your vape, and your temperature controls the different variables, such as the intensity of your vaping session and the flavor. Remember, different thc oils will have different heating points, so your settings will need to be adjusted accordingly.

If you are new to vaping, we recommend that you start with the lowest available settings on your variable voltage vape pen and then start to increase from there. With the lower settings, you are going to have a smoother flavor from your weed vaporizer, as well as less intensity. This will make for a much milder vaping experience that is ideally suited to beginners.

For those that have been vaping for much longer, a more intense and flavorful vaping session may be preferred, which will require a higher voltage setting. Again, no two compounds or people are the same, and settings will quite often vary slightly from session to session, so it is important to take this into account and adjust your settings accordingly.

How Do You Use A Variable Voltage Vape Pen?

The great thing about most variable voltage vape pen batteries is that they are extremely easy to use and straightforward to operate. Even if you are a beginner vaper, you should find your variable voltage vape pen relatively easy to operate.

Some variable voltage batteries require that you turn them on or off manually by clicking the firing button on your device. This will allow the current to leave the battery and head towards the oven or coil.

Other variable voltage vape pen batteries are puff or draw-activated that activate the battery when you inhale through the vaporizer’s mouthpiece. Almost all variable voltage vape pens come partially charged and ready to use straight out of the box.

Wrap Up

As you can see, there is a huge range of benefits associated with using your weed pen for vaping. However, the biggest benefit is finding the precise temperature control that suits you!

While many vaporizers with regular batteries are set up to cover a general range of temperatures, a variable voltage thc pen is adjustable, which means that you can customize your settings to meet your preferences. This level of customization allows you to choose your preferred voltage to satisfy a particular mood.

There’s no reason why you can’t have an intense flavor-packed session one day or start the day with a less intense and smooth flavor session the next day. Ultimately, how you choose to vape is up to you if you take advantage of a variable voltage 510 thread battery.

If you have ever had a bad vaping experience and found it too intense or not intense enough, then a variable voltage weed pen could be the solution that you’ve been searching for! Looking for more information? Be sure to check out these other Frequently Asked Questions.

CBD Cartridges and Batteries

The aromatic experience can be personalized by either lowering or raising the power settings as well as adjusting the top airflow regulator. Adjusting this regulator effects the air to vapor ratio.

Preheat Mode

Click the multi-use button 2 times to initiate the preheat cycle. The preheat setting is used to warm up the hemp oil distillate, increasing the flow rate into the ceramic heating element. This setting comes in handy when your cartridge is exposed to very low temperatures.

The preheat cycle can additionally be used as a “session mode.” Since the preheat cycle will provide power at 2.1v for 15 seconds, many people like to use this for terpene heavy draws.

Preheat mode may be canceled by clicking the power button during a heating cycle.

Cartridge Content

Dr. Dabber Distillate Cartridges are filled with U.S. Grown Broad Spectrum Hemp CBD Distillate and a Signature Terpene Blend crafted by our friends at TrueTerpenes.

CBD, also known as cannabidiol, is one of many non-psychoactive cannabinoids found naturally in the flowers, leaves and stems of the hemp plant. Our hemp is sourced from USDA certified farmers from across the United States, including New York, Oregon, Colorado, Nevada, and Washington. We only use US grown hemp, and will never import material from outside of the United States. Dr. Dabber Distillate Cartridges contain approximately 250mg of naturally occurring broad spectrum cannabinoids. This spectrum includes a ratio of CBD, CBN, CBG & CBC.


Difference Between Full Spectrum & Broad Spectrum

Full-spectrum hemp distillates contain more than a single naturally occurring cannabinoid. Generally, these concentrates contain the entire spectrum of cannabinoids, terpenes and flavonoids that originate in the starting botanical material. This may include various levels of THCa, Δ9-THC, CBDa, CBD, CBC, CBG, CBN, THCV, Δ8-THC, CBGa & CBDV.

The main concern for consumers when using full-spectrum hemp oil is the amount of residual THC found in the concentrate. Our distillate is a bit different than your standard full-spectrum hemp oil. We spend additional time and resources to extract the full range of cannabinoids, while eliminating the residual THC that produces psychoactivity. This is also known as a broad spectrum distillate. It contains a specific mixture of naturally occurring cannabinoids, terpenes and flavonoids, but not everything from the original material.

What Experience Can Be Expected From Each Blend?

Original: Our signature terpene blend bringing notes of citrus, candied fruit and sour seeded berries. Both satisfying and subtle, we believe this is the perfect aromatic blend.

Citrus: Awaken your taste buds with this citrus dominant blend. Hints of Florida orange blossoms and honey suckle pair perfectly with citrus notes including grapefruit, lemons and lime.

Fresh: A refreshing and bright expression of everything green. Notes of pine, mint, cucumbers and fresh cut grass transport your senses straight into the summer.

Robust: Bold tones of bourbon, violets, and earth give this terpene blend a very complex and rich flavor profile. This full-bodied cartridge was made for someone looking for a savory experience.

Third-Party Tested

All of our Distillate Cartridges are tested by a third-party laboratory. These testing results are available to consumers by scanning the QR code on the back of the packaging or entering the batch number online. We believe transparency is key, and are excited to share the quality of our personal aromatic diffusers. Each batch of hemp oil is tested for cannabinoid and terpene content, heavy metals, pesticides, herbicides, and residual solvents. We never use fillers like PG, PEG, VG, MCT or Vitamin E Acetate in our distillate cartridges.

Can The Universal Battery Be Used With Any Other Cartridge?

Yes, the Universal Battery should be the last 510 threaded battery you need to buy. With 3 voltage settings, a pre-heat mode, and our signature warranty program, this is the perfect battery for almost any cartridge on the market.

What Types Of Batteries Can I Use With A Distillate Cartridge?

We recommend using the Dr. Dabber Distillate Cartridge with a variable voltage, manual operation, 510 threaded battery. The cartridge is equipped with a top airflow regulator, providing the user the ability to personalize their experience with not only voltage, but to air to vapor ratio as well.


Make sure your battery is fully charged for best results.

Remove the cartridge from the battery and ensure there is no debris between the contact and the battery, then reattach. This will help with any faulty connections or misfires.

Make sure your cartridge is not threaded too tightly to the battery. About finger tight is recommended.

Clean all connection points between the cartridge and the battery with a cotton swab and ISO alcohol. Clean out any residue from the airflow regulator.

Check the firing pin on the battery for damage or residue.

Make sure your battery is powered on with 5 rapid clicks of the power button. The battery is on when the light illuminates while the power button is depressed.

Feel free to check out our instruction videos by visiting our Dr. Dabber YouTube Channel or follow us on Instagram, Twitter, Discord, and Facebook.

Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Can i set the voltage for cbd oil

Shipping cannabis is illegal. Currently, Co2lors products are only available through licensed dispensaries in the state of Colorado, California, Arizona, Maryland, and Florida. You can search for the dispensary nearest to you by using our Store Locator.

We stand behind our products and want to make sure you have the best experience. If you ever have an issue or question, please reach out to our Customer Service department at [email protected]

  1. Take the All-In-One out of the package.
  2. Take the silicone mouth cap off.
  3. Take 3-4 quick puffs from the mouthpiece to prime the pen for an optimal experience. Once primed, take a slow steady inhale. The light on the end of the pen should light up.
  4. To refill, unscrew the top of the cartridge and refill with one of our Refill Kits
  5. To recharge, take a micro USB cable and plug into the port located at the bottom of the unit.
  1. Remove child-proof cap by pushing down and to the left.
  2. Place the top of syringe under warm water for 60 seconds to make the oil easier to work with.
  3. Unscrew the mouthpiece from the cartridge.
  4. Remove metal tip from bottom of syringe.
  5. Secure the metal tip by twisting onto the end of the syringe.
  6. Place the metal tip inside of the cartridge. DO NOT put oil inside the metal tube as this will destroy the cartridge.
  7. Fill the cartridge with oil, leaving a little space at the top so it doesn’t overflow the oil when screwing the mouthpiece back on.
  8. Screw the mouthpiece back onto the cartridge.
  9. Allow the oil to settle to the bottom of the tank.
  10. Prime the cartridge by taking some short puffs on the cartridge before screwing on the battery. This allows the wick to saturate.
  1. Take cartridge out of the packaging.
  2. Firmly screw on cartridge to battery. Do not over tighten. Cartridge should align flush with battery. Over-tightening could result in shorting out the battery.
  3. Remove rubber tip from cartridge mouthpiece. Inhale 2-3 times through mouthpiece before turning battery on. This will optimize airflow.
  4. Tap battery button 5 times quickly to turn on. You will know battery is on because battery light will flash.
  5. Hold button for 3-4 seconds then let go. Repeat this process two or three times. This will optimally prime your cartridge for use.
  6. You are now ready to enjoy your Co2lors oil. Hold down button and inhale slowly and steadily for the best draw.

TIP: You will know the battery is working because the light will remain on while being pressed. If the battery light blinks while being pressed, try loosening the cartridge. If that doesn’t work, the battery might be dead. Keep rubber tip on the cartridge when product is stored in your pocket.

For more information on how to use your variable flow cartridge, watch our video tutorial.

  1. Unscrew cartridge from battery.
  2. Screw or plug in USB charger into battery. This is dependent on the type of battery you have. Do not over-tighten for a screw-in USB port. Do not use different USB cords.
  3. Plug into USB port. A red light indicates the battery is charging. A green light indicates that charging is complete. Unplug when charged.
  1. Charge battery before use: push or twist the charger into the pen to secure pieces together.
  2. Turn the unit on or off by pressing the button 5 times rapidly.
  3. To Change Voltage (vape battery has 3 temps – Low: green I Medium: blue I High: red): Clicking button 3 times quickly.
  4. Once on, hold down the button to enjoy your new Co2lors battery.

TIP: Only use our pre-heating function when necessary. Specifically when the oil is very cold. Overuse of our pre-heating function can damage your cartridge. We recommend using our batteries with our cartridges for the best experience. Also, we recommend using the blue heat setting for best results.

Always store your products in a dry, cool climate and in an upright position. Never leave them in extreme temperatures like a very hot or cold car.

TIPS: If you leave your cartridge or All-In-One on it’s side, leave the unit mouthpiece up for about an hour before use or you can warm the unit in your hands until the oil settles at the bottom of the tank. Then take some short 2-3 puffs to saturate the wick before enjoying.

Highly-refined cannabis concentrates like Chroma and Alchemy that are greater than 80-90% purity are very viscous, thick substances. In vape cartridges, these concentrates will not properly vaporize unless changed to a more liquid form. Other companies use a variety of questionable cutting agents including PEGs (polyethylene glycols), glycerin, MCT (medium-chain triglycerides), vitamin E oil, vitamin E acetate, and other chemicals.

At Co2lors, we prefer to avoid unnecessary additives, so we developed a unique CO2 fractionation process to extract and purify a combination of cannabis terpenes, terpenoids and other phytochemicals that we call our CDCA, or Cannabis Derived Cutting Agent. This formula is blended with our concentrated cannabinoids to provide a consistent, effective formulation – with no additives and nothing but cannabis. To read more about cutting agents and what to look for when purchasing vape products, check out this blog post from our Chief Scientist.

Co2lors created the world’s first suite of cannabis specific pharmaceutical-grade extraction technologies. We produce exceptionally pure oils, without the use of any cutting agents. Our proprietary technology is designed to preserve the compounds of the whole plant, because we know it takes all the elements in cannabis to make THC great.