co2 compressor for cbd oil

High Quality, High Capacity CBD Extraction Machinery

As seen in WSPA 7News’ video, “Inside Upstate CBD Oil Processing Facility ‘SC Botanicals,’” extraktLAB®’s Model 140 supercritical CO2 extractor is compact enough to fit in any size facility. Chris Cortina, SC Botanicals’ Director of Operations, outlines the supercritical CO2 extraction process before showing off their brand-new Model 140:

@ 1:37: “We use a process called, ‘supercritical CO2 extraction,’ that basically turns CO2 that you would get to carbonate beverages into a supercritical form. So, it acts as a gas and a liquid at the same time. And then, when you take your extract, it immediately evaporates so that there’s nothing left but the pure oil.”

@ 3:25 “This is a supercritical CO2 extractor. The way that it works: we load ground hemp into these columns here and the machine is pressurized. It takes supercritical CO2, which is carbon dioxide gas — the kind you’d see in beverage dispensers — and it turns it into a supercritical state, which is where it acts as a gas and liquid simultaneously. And that lets it act as a solvent for the CBD and pull it out.”

@ 3:52 “It only resides in this container and so when you extract the material the CO2 dissolves into the air. So the machine pressurizes these vessels and the oil flows through the machine and is captured in these collectors; these produce three different grades of oil. And so we collect them separately and they basically are homogenized for a final end product.”

High-Quality CBD Extraction Machinery

SC Botanicals is not the only hemp processor placing their bet on extraktLAB’s cutting-edge supercritical technology, which offers “some of the fastest processing on the market today,” according to GreenRushDaily.

The up-and-coming firm, Golden Developing Solutions, recently put out the very revealing press release, “Golden Developing Solutions Readies Launch of Supercritical CO2 CBD Extraction Facility in Colorado.” This article details the end of their due diligence phase prior to facility buildout:

“Management expects the facility to be fully operational by Summer 2019. Machinery orders will be finalized within the next 90 days. Following a detailed comparative examination of high-quality, high-capacity supercritical CO2 CBD extraction machinery manufacturers, the Company has narrowed its search down to Isolate Extraction Systems and ExtraktLAB” (Golden Developing Solutions 2019).

We’re honored to see our Model 140 supercritical CO2 extractor being so well-received! A throwback to our CEO Dr. Jon Thompson’s blog article, “How to Scale Up Your Extraction Business to Process One Ton Per Day,” outlines the Model 140’s high-performance numbers:

  1. 25 ft sq for extractor + 25 ft sq for chiller + 1 ft sq for the compressor = 51 ft sq.
  2. 63 amps for extractor + 15 amps (per extractor) for the chiller + 4 amps for the compressor.
  3. 17.6lbs/hr or 8 kg/hr.
  4. Trim at 20% delta 9 = 1,500-2,000 g/hr. Trim at 10% delta 9 = 800-900 g/hr.
  5. CO2 has no restrictions on amount as it poses no fire hazard. May need permit from city but this is (typically) a trivial process.
  6. Staff = three people per 8-hour shift. One person can run up tosix6 machines, need one person for pre-processing for six machines, and need one person for cleaning/maintenance.

Looking to scale your existing business into a one-ton-per-day hemp extraction facility? Read more about our facility design and layout services to learn how extraktLAB can help make it happen.

WSPA 7News. “Inside Upstate CBD Oil Processing Facility ‘SC Botanicals.’” YouTube: 07 December 2018. Website:

Frequently Asked Questions

Why should I choose extraktLAB equipment?

extraktLAB’s supercritical CO2 extractors are highly efficient and increase overall extraction yield. They are also capable of decreasing your yearly operating costs and leave scale up opportunities.

Does hemp biomass need to cure before extraction?

No, the material does not need to cure. Our methods complete the final drying step in a vacuum oven to bring the water content down from 10% to the 1% – 1.5% range for efficient CO2 extraction.

Can the drying process be accelerated using higher temps/lower humidity?

There are several drying methods used by growers to accelerate drying, but this is outside our scope of solutions. We recommend researching the agricultural methods to find what works best for you.

What are the typical conditions to dry hemp for extraction?

Harvest drying methods are outside the scope of our solutions; however, you want to dry the biomass to roughly 10% water content for quality storage to prevent mold or mildew.

When producing CBD from hemp, which part of the plant is typically used?

Typically flowers and leaves – no stems or stalks. Some producers will sort out the flowers and process them separately, but most processing includes the leaves and flowers.

Can ethanol become contaminated during ethanol extraction?

Yes, ethanol can become contaminated during ethanol extraction. It is important that you address the contamination with testing and reuse protocols. guidance for solvent reviews have been published by the FDA in 2010. Please refer to the many articles in this blog for more information on cross-contamination with extraction.

What is the electrical cost of ethanol extraction vs. CO2 extraction?

Processing a ton of hemp per day into extracts can be an energy-intensive process depending on how the hemp is extracted. The following table compares the energy expense for ethanol extraction versus the energy expense for CO2 extraction:

Energy cost for Ethanol Extraction for 1 ton per day at 1 gallon ethanol per 1 lb of hemp
18711 litres to cool from 25 to -20
16840 litres to heat and evaporate after ethanol loss
454 kwhr to Cool from 25 to -20
481 kwhr to heat to boiling point
3105 kwhr to evaporate
4040 kwhr total @ 100% Efficiency
75% Efficiency
5387 kwhr Total
$ 0.09 per kwhr
$ 506.36 per day
Energy cost for CO2 Extraction at 1 ton per day including winterization
636 litres to cool from 25 to -20
636 litres to heat and evaporate after ethanol loss
15 kwhr to Cool from 25 to -20
18 kwhr to heat to boiling point
117 kwhr to evaporate
151 kwhr total @ 100% Efficiency
75% Efficiency
201 kwhr Total
$ 0.09 per kwhr
$ 18.92 per day for winterization
43.20 Kwhr per day for CO2 extractors
$ 3.88 Per day for CO2 extractors

Would you recommend ethanol extracted oils for Vape products?

Due to the risk of chemical contaminants that are found in 25 to 30% of ethanol extracted oils , we recommend that CO2 oils be used for Vapor Products.

Is it possible to make a solventless extract with CO2?

It is absolutely possible to make a solventless extract with CO2. Solventless extracts are typically made with subcritical CO2 extraction methods.

Does ethanol extraction have a greater throughput than CO2 extraction?

Hemp processing equipment can be scaled for 1 to 5 tons of extracted hemp per day. It’s generally not a fair comparison to compare the throughput on an instrument from two different companies. What is fair is to specify the throughput At the tonnage process per day and then look at the operating cost for that process. You can also look at the equipment and Facilities cost to accommodate that level of Production. after you have all of your costs accounted for including the hidden costs, then you can calculate the net present value for each investment.

What are the most common denaturants in ethanol?

Denatured ethanol is a mixture of denaturants and pure ethanol. Chemical companies add the denaturant to Pure ethanol so that they will not be consumed as a food.
Denatured recipes are published by the ttb that is administered by the National Bureau of Alcohol Tobacco and Firearms. There are many different recipes. one of the most common denaturants used in ethanol extraction is heptane. However there are other substances that may be used including acetone, isopropyl alcohol, methanol and other longer chain alcohols.
Is very limited data on the safety of heptane over the long term exposure. In fact the limit that the FDA has placed on the amount of heptane in a tincture for example was established in the 1990s on the basis of a single study published in 1981. That study the effect of heptane on Sprague dawley rats. That is why there are many disclaimers and the general guidance from the FDA is to limit the amount of solvent in any drug that is consumed.

Doesn’t ethanol extraction equipment remove all the ethanol from the biomass after extraction?

No. Approximately 5 to 10% of the ethanol is left in the biomass and is counted as a solvent loss. These solvent losses add up to operating costs. This is especially true if organic ethanol is used or food grade ethanol is utilized as the extraction solvent.

If you had an ethanol extraction facility, would you ever use CO2 just for stripping terpenes?

Ethanol extraction typically destroys the terpenes when the ethanol is removed from the extract or is distilled from the winterized oil. Many ethanol extractors are seeking a way to preserve the terpene profile of the plant in the output oil. To this end people have tried techniques such as Steam distillation, CO2 stripping, and vacuum distillation.
Certainly, CO2 can be used to strip terpenes from Hemp biomass Prior to ethanol extraction. However, vacuum distillation is by far the most gentle and effective way to harvest the terpene profile prior to ethanol extraction.

How do I model and compare the financial return of ethanol extraction vs CO2 extraction?

There are many inputs that need to be defined when creating a financial model comparing two different extraction methods. The first decision to be made is to decide what the financial metric will be used to make a decision on the superiority of one method over the other.

In this case, we recommend the use of the Net Present Value as the way to model the return of each extraction technique because it accounts for the cash flow associated with the operation. Many ethanol extraction companies try to make the argument that ethanol extraction is lower cost because the equipment cost is less. However, the equipment cost will have very little impact on the overall profitability of the operation at the same throughput.

The best way to compare the two techniques is to fix the throughput so that an apples-to-apples comparison can be made. Comparisons such are payback time and return on investment can mislead someone into making a bad investment decision.

So if we fix the throughput at one ton per day the cost of the hemp is equal between the techniques and operating cost variance is the only contributing factor.

Here are the twelve key questions that need to be defined in order to do a comparison:

  1. What is the direct labor to process?
  2. What is the energy to process?
  3. What are the solvent losses?
  4. What are the direct material startup costs including solvent startup costs?
  5. What are the cannabinoid recovery rates?
  6. How much solvent do I use, reuse, and when do I need to replace the solvent with fresh solvent? and at what interval?
  7. What is the insurance cost for each option?
  8. What is the cost of hazardous waste disposal?
  9. What is the cost of solvent removal?
  10. What is the cost of reuse of the solvent?
  11. What is the cost of HAP emissions?
  12. What is the depreciation for each option including building costs for H2 vs F2 occupancy?

Once these questions are answered you will be able to build a pro forma income statement.

  • Standard labor
  • Standard materials
  • Overhead
  • SGA
  • R&D

You can then hold SG&A and R&D constant for both techniques and account for the difference in depreciation to get to a net margin number.

A cash flow statement can then be generated from net margin. One thing to note is that depreciation must be added back to net margin as it is a non-cash expense on the income statement.

Cash flows are then added up for 5 consecutive periods (years) including the initial outlay of cash for startup working capital. Those cash flows are then discounted at a discount rate (Weighted average cost of capital estimate at 13-17%).

If you do this analysis, you will find that CO2 extraction will absolutely crush ethanol extraction in terms of net present value.

Does it cost less to process hemp with Co2 compared with Ethanol?

In fact the operating cost for CO2 extraction is dramatically less than the operating costs associated with ethanol.

Extraction with Ethanol is a process that is typically run at low temperatures. First the ethanol is cooled to below -20oC before it is introduced to the hemp. Cooling the ethanol reduces the amount of extracted chlorophyll and waxes. If you account for the energy required to chill the ethanol down to those low temperatures and then also evaporate after use, the energy bill for extracting ethanol is approximately 3-6x the cost of extracting with CO2. However, the energy cost is really not the key driver in the overall operating costs.
Ethanol extraction requires a significant amount of ethanol to be used per pound of hemp. In fact, about 1 to 1.5 gallons of ethanol must be used per pound of dry hemp in order to extract. Hemp is a very absorbent biomass material and the ethanol must fully saturate the hemp plant before any extraction can take place. For this reason a large volume of ethanol is needed to extract cbd from hemp.
The key cost driver or ethanol extraction is recovery of that solvent from the biomass. Even though many ethanol extraction equipment companies provide centrifuges and or presses to eliminate the amount of ethanol left over in the biomass, The best equipment will provide only a 90 to 95% recovery of the ethanol. This 5 to 10% loss in ethanol is a huge cost driver for extracting ethanol.
For example, suppose you wanted to process 1000 lb of hemp. You would need 1000 gallons of ethanol to start out at a cost of $16-33 per gallon for food grade ethanol for a total cost of $16,000 to $33,000. If you recovered 90% of the ethanol the ethanol loss would be $1,600 – $3,300 per 1000 lbs. Furthermore if you process 1000 pounds per day, this would be your daily loss.
In contrast, you will lose the equivalent of about $70 per day for CO2 extractions for the exact same process.
Besides energy and solvent usage, there are many other hidden costs related to extraction with ethanol including solvent reuse costs, insurance cost, increased facilities cost, and testing costs.

Is CO2 cheaper than ethanol?

A pound of food grade ethanol when purchased in bulk is $4.71/lb at current price.
A pound of food grade CO2 when purchased in bulk is about $0.04/lb at current price.

What’s the purity of the CO2 used in CO2 extraction?

There are many grades of CO2 including industrial and food grade and medical grade. We typically use food grade but medical grade is also highly desirable. the specifications for each of these grades are published by the Compressed Gas Association or by your gas supplier.

How we extract supercritical CO2, a detailed solution for you to understand

Supercritical CO2 extraction has been used in the food and beverage industry for decades, from reducing fat content in cheese to decaffeinated products such as coffee and tea. Because the method is relatively safe, simple and environmentally friendly, non-toxic supercritical CO2 extraction is also widely used throughout the cannabis and herbal tonic industries. Before delving into the details of CBD extraction, it is helpful to understand the basics of supercritical CO2 extraction. Supercritical CO2 extraction works because the CO2 is tunable, which means it can be modified to focus on extracting specific compounds (such as CBD). This is accomplished by perfectly balancing temperature and pressure variables. For example, materials with high terpene content can be extracted better at lower pressures and temperatures, while materials with high resin content are more likely to be extracted at higher pressures and temperatures. The maximum extraction efficiency varies from plant to plant, but cannabis is highly responsive to the process, making supercritical CO2 extraction an ideal way to handle CBD. The method consists of three basic steps.

Supercritical CO2 CBD Extraction Method – How Does CO2 Extraction Work?

The CO2 cannabinoid extraction method starts with a relatively simple setup. The extractor uses an extraction vessel and a dual-injector piston compressor to bring the material into contact with CO2 that has reached supercritical parameters. First, the plant material is placed into an anodized aluminum vessel called an extraction tower. Preferably, the extraction column is loaded by first filling small sections and then packing these sections tightly together. This will ensure that the plant material is uniformly filled and compressed within the chamber to fill the solids; this will allow direct contact of careddi Supercritical CO2 Extraction Machine with as much of the plant material surface area as possible. In a separate compartment, an internal compressor and heating element are used to increase the pressure and heat so that the CO2 reaches its supercritical state. In its supercritical state, CO2 retains many of the properties of a liquid and a gas. This means that supercritical CO2 can pass through the plant material as a gas and also pass through the material as a liquid. Next, the supercritical CO2 extract flows into a collection tank where the pressure from the feedstock tower to the collection tank suddenly decreases, causing the CBD to separate from the CO2, resulting in the collection of virgin CBD oil.

At LEAFBLOOM Organics, we want our customers to experience CBD without compromising quality and purity. Our raw CBD oil extracts are made with our customers in mind first. Our oils are never processed, filtered or distilled. We benefit from fats, lipids, chlorophyll, and all other plants, and the end product is what nature intended it to be all along. To learn more about cannabinoids such as CBD, please read this post carefully about CBD and CBDA. to learn more about how much CBD you should take, please read this post here.

co2 extraction cbd for dogs

Before we get into the details of the CO2 extraction method, we should problem give you a rundown of CBD oil.

CBD oil is one of the active ingredients found in cannabis. Unlike THC, CBD does not have psychoactive properties, yet it does still have several health benefits inside. Some of those health benefits include relief from cancer symptoms, reduction in inflammation, and help with mental health disorders such as anxiety and depression.

So, how does get to, or make, the CBD oil?

Through the CBD CO2 extraction process.

CO2 Extraction Method

First things first: You can only use cannabis and hemp plants for the extraction process.

Next, you’ll have to make sure the plant selected has a high CBD concentration and a low THC concentration.

Finally, you’ll have to start your extraction.

CO2 extraction uses pressurized carbon dioxide to pull CBD out of the plant. If the CO2 is at the perfect temperature and pressure, it will get the job done with no dangerous after effects. The process is safe and effective, but it does involve costly equipment.

What Happens During Extraction Processes?

As you now know, the equipment people use to extract the CBD from the plant is extremely expensive. Why? Probably because the machines have to go through a lengthy process to freeze the CO2.

Generally speaking, carbon dioxide is a gas when it’s at standard temperature and pressure; however, it can be changed to a solid with the right temperature and pressure, too. When carbon dioxide is solid, we reference it as ‘dry ice.’ To turn the gas into a liquid and then into a solid, CBD extractors will start by dropping the temperature to -69 degrees Fahrenheit while increasing the pressure to over 75 pounds per square inch. This is their starting point.

Then, you’ll take the liquid CO2 and raise the pressure even more using a compressor. The temperature will then be raised using a heater. Once all steps are complete, the extractors will pass the carbon dioxide through the cannabis to pull out the necessary components.

What Happens After Extraction is Complete?

Once the necessary components are out of the plant, the CO2 has no further use for that particular extraction. The carbon dioxide and essential components then go through a separator, to which the CO2 goes through a condenser and is made a liquid again, and the components are passed on to make CBD oil. The CO2 can be useful for future extractions, too.

The carbon dioxide CBD extraction method is the most common process that extractors use in their endeavors. There are other methods to consider, such as the dry ice extraction method and the olive oil extraction method, but those are not as widely known.

CBD companies are not secretive when it comes to the method they choose. If their selection is not present on their website, you can call them directly, and they’ll be sure to answer any questions concerning extraction methods.