Scotts Fall Weed And Feed Seeding

ILGM

Buy Cannabis Seeds Online

Feeding your fall lawn provides helpful nutrients to fight weeds and strengthen lawn grasses for the winter ahead. Can I Put Down Scotts Super Turf Builder Plus 2 If I Overseeded Four Weeks Ago?. A well-kept, healthy lawn should be plush, free of weeds and diseases, and as green as the neighbors’ envious hearts. Weed and feed products are designed to provide needed nutrients to the grass while poisoning weeds that want to … Location C Grass: Tall fescue I applied weed killer one month ago, and over seeding TODAY (quite some big bare spots). There is still a lot of weed,

Fall Season Fertilizer and Weeding Tips

Fall’s arrival brings changes in day length, temperature and precipitation, along with important changes in your lawn. Some lawn grasses and weeds begin to slow down and prepare for winter dormancy, but others kick into high gear. Feeding your fall lawn provides helpful nutrients to fight weeds and strengthen lawn grasses for the winter ahead. However, what and when to feed and how to manage weeds depends on your climate and the type of grass you grow.

Feeding Cool-Season Lawn Grasses

Cool-season grasses, such as Kentucky bluegrass, perennial ryegrass and fescues, flourish in northern regions with warm summers and cold winters. Cool, moderate, early fall temperatures send these grasses into their most active growth season, which is the ideal time for fertilizing and strengthening.

Start fertilizing cool-season grasses about six weeks before the average first frost in your area. Fresh out of summer dormancy, these grasses benefit from added fall nutrition, which spurs new shoot, stem and root growth, and helps increase their food reserves. 1 September and October are prime cool-season fertilizing times for much of the United States.

A high-nitrogen lawn fertilizer with added potassium, such as Pennington UltraGreen Lawn Fertilizer 30-0-4, stimulates dense, healthy growth and supports winter and summer hardiness. The added boost of natural organisms from Pennington’s Myco Advantage technology increases the surface area of grass roots, improving your lawn’s ability to absorb water and nutrients, and enter winter prepared.

With broadleaf lawn weeds still actively growing in early fall, a weed & feed product such as Pennington UltraGreen Weed & Feed 30-0-4 fertilizes established cool-season lawns and kills a broad spectrum of common weeds through the help of three separate weed fighters. Follow label instructions closely to ensure you don’t exceed annual limits for broadcast applications.

Fertilizing Warm-Season Grasses

Warm-season grasses, such as Bermudagrass, bahiagrass, centipede grass and zoysia grass, thrive in southern regions and peak in growth during warm summer months. As fall approaches, their growth slows and dormancy sets in with the season’s first killing frost.

Feed warm-season grasses their last feeding of the season six to eight weeks before the average fall frost date in your region. They’re still actively growing, but they’ll soon need to harden off and prepare for winter. Bermuda grass has higher nitrogen needs than some other warm-season grasses, so it can be fertilized up to four to five weeks before frost. 1 But don’t feed warm-season lawns any later. Fertilizing too late in the growing cycle can stimulate late-season growth that delays dormancy and makes lawns more susceptible to winter injury.

Warm-season grasses often go dormant and turn brown during winter, leading many southern lawn owners to overseed lawns with a cool-season grass that provides temporary green color through the winter months. Overseeding should take place at least 45 days before your average first fall frost, so new seeds can establish before winter. 2 Fertilize newly overseeded fall lawns with a starter fertilizer such as Pennington UltraGreen Starter Fertilizer 22-23-4, which supports robust root growth and greening of the cool-season grass. Avoid using weed & feed products on newly overseeded lawns, as they may prevent germination of the new grass seed. Consult your local Cooperative Extension Service for current information on limits for lawn fertilizers in your region.

See also  How To Germinate Weed Seeds

Managing Fall Lawn Weeds

Like lawn grasses, common lawn weeds are either warm- or cool-season plants that follow the same seasonal growth peaks that lawn grasses do. Annual weeds, such as warm-season crabgrass, complete their life cycle in one year – but leave plenty of seeds behind for years to come. Perennial weeds, including cool-season plantains, live many years. Untreated, they come back from the roots year after year and spread extra seed, too.

Early fall is a perfect time to tackle tough turf weeds. Existing perennial weeds are still active and hard at work storing up food reserves, which leaves them very vulnerable to treatment. Weed killers get swept through the plant along with carbohydrates meant for energy stores in stems and roots, and few parts of the plant escape. 3 As warm-season weeds go dormant, movement through weeds slows or stops and resilience increases, making treatment more difficult.

In established fall lawns, weed & feed products help prevent cool-season weed seeds from germinating and emerging. In dormant southern lawns, emerged cool-season weeds stand out bright green against brown lawn grasses, which makes spot treatment easy. Effective post-emergent weed treatments, such as IMAGE All-in-One Killer, offers broad-spectrum fall control for difficult sedges, crabgrass and broadleaf weeds. IMAGE Kills Nutsedge, available in concentrate and ready-to-spray formulas, controls winter weeds in warm-season lawns, including Poa annua, also known as annual bluegrass, a troublesome annual weed common in Bermudagrass lawns.

Feeding your fall lawn and controlling its weeds helps leave grasses strong and healthy. With the help of the Pennington UltraGreen line of lawn fertilizers and IMAGE weed treatments, your lawn will be ready for the months ahead.

Never use any weed product on a lawn grass unless the grass is noted on the product’s label.

Pennington and Myco Advantage are registered trademarks of Pennington Seed, Inc. Amdro and UltraGreen are registered trademarks of Central Garden & Pet Company.

Sources:

1. Michael Goatley Jr., Shawn Askew and David McCall, “Fall Lawn Care,” Virginia Cooperative Extension.

2. Turfgrass Water Conservation Alliance; “Simple Tips,” October 2014.

3. Zac Reicher, Cale Bigelow, Aaron Patton and Tom Voigt, “Control of Broadleaf Weeds in Home Lawns,”Turfgrass Science, September 2006.

Can I Put Down Scotts Super Turf Builder Plus 2 If I Overseeded Four Weeks Ago?

A well-kept, healthy lawn should be plush, free of weeds and diseases, and as green as the neighbors’ envious hearts. Weed and feed products are designed to provide needed nutrients to the grass while poisoning weeds that want to steal the lawn’s food. Scotts Super Turf Builder with Plus 2 Weed Control works on several species of lawn grasses. While the company’s website recommends waiting four weeks to put down grass seed after applying the weed and feed, seeding first means waiting a different length of time before you use the product.

Healthy Lawn Chemistry

Scotts Super Turf Builder with Plus 2 Weed Control, now called simply Super Turf Builder with Weed and Feed, contains more nitrogen and phosphorus than plain Turf Builder Weed and Feed, to provide faster green-up. Super Turf Builder contains 29 percent nitrogen, 2 percent phosphorus and 3 percent potassium, while plain Turf Builder contains 28 percent nitrogen, no phosphorus and 3 percent potassium. The active weed-killing ingredients are 2,4-D and mecoprop. Environmental health agencies in some areas list 2,4-D as a chemical known to cause cancer or birth defects, so use with caution.

If you are unable to find Super Turf Builder Weed and Feed, Scotts Turf Builder Triple Action provides similar results. It kills weeds, prevents the new weeds from sprouting and feeds the grass.

Timing Is Everything

The Scotts website question-and-answer section states that grass seeds should be allowed to germinate and grow tall and strong enough to be mowed four times before you apply weed and feed. No entirely specific time period is provided, because different grass species grow at different rates, and growth is affected by many variables, including soil quality, temperature and rainfall or manual irrigation.

See also  Cannabis Seeds Oklahoma

The Nitty Gritty

This turf builder weed and feed should be applied with a mechanical spreader for even distribution. When using a spreader, Scotts Turf Builder Plus 2 spreader settings vary depending on the device. Set broadcast and rotary spreaders at 3.5, hand-held spreaders on 3 and drop spreaders on 5. Even if you’ve used the turf builder products for years, always check the package directions to ensure that the instructions haven’t changed.

Before applying any fertilizer or herbicide product, put on a mask, safety goggles, gloves, long sleeves, long pants and closed toe shoes. After applying the weed and feed and cleaning the spreader, wash your clothing in hot water and detergent to remove any dust or residue.

Wait for a calm day when temperatures are not expected to rise above 90 degrees Fahrenheit and no rainfall is expected for at least 24 hours. Water the lawn first to moisten the grass, or start the application when the grass is moist from dew. The product should be applied while weeds are actively growing in the lawn. A second application may be made, but wait at least 30 days — and do not use the product more than twice each year.

Scotts Turf Builder Plus 2 Liquid

If you have a very small lawn, an alternative to the granular Scotts weed and feed products is the Scotts Liquid Turf Builder with Plus 2 Weed Control. This liquid fertilizer provides a quick boost of nitrogen as well as killing clover, dandelions and other weeds. Simply attach the garden hose and spray the lawn when the weeds are actively growing.

Use It Carefully

Make sure the product does not spill or drift on the wind to desirable plants, and don’t use it within several feet of fruit or vegetable plants. Sweep up any fertilizer that drifts onto sidewalks or driveways and toss it back onto the lawn.

Do not apply on St. Augustine grass, including the Floratam variety. St. Augustine grasses (Stenotaphrum secundatum) grow best in U.S. Department of Agriculture plant hardiness zones 8 through 10. The product is not appropriate for carpet grass (Axonopus affinis), which thrives in USDA zones 9 through 10, or dichondra (Dichondra spp.), a creeping ground cover often used in place of standard lawn grass in USDA zones 7 through 11.

Scotts Fall Weed And Feed Seeding

Please register to participate in our discussions with 2 million other members – it’s free and quick! Some forums can only be seen by registered members. After you create your account, you’ll be able to customize options and access all our 15,000 new posts/day with fewer ads.

Search Forums (Advanced)

Location C
Grass: Tall fescue

I applied weed killer one month ago, and over seeding TODAY (quite some big bare spots). There is still a lot of weed, but I just spread grass seed anyway. I don’t care whatever amount of grass seed can germinate, and I expect quite some grass seed will germinate within one week (based on previous year’s experience, good grass seed, straw, Scotts Turf Builder Starter Food for New Grass, watering twice a day)

I would like to apply WinterGuard Fall Weed & Feed around thanksgiving. Will it kill young grass? By the time, I should mow new grass at least three times.

Too much weed, every fall after overseeding, lawn looks much better, it looks ok till next summer, then weed grows like crazy and grass die. I apply Crabgrass Preventer & Weed Control every spring, also apply weed killer too. It only happens to backyard lawn, front yard lawn looks much better with less maintenance. It is headache to keep repairing backyard lawn. Maybe the land(quite some big trees were there 3 years ago and all those trees were removed) is not good for lawn.

Location C
Grass: Tall fescue

I applied weed killer one month ago, and over seeding TODAY (quite some big bare spots). There is still a lot of weed, but I just spread grass seed anyway. I don’t care whatever amount of grass seed can germinate, and I expect quite some grass seed will germinate within one week (based on previous year’s experience, good grass seed, straw, Scotts Turf Builder Starter Food for New Grass, watering twice a day)

See also  Buy Marijuana Seeds Denver

I would like to apply WinterGuard Fall Weed & Feed around thanksgiving. Will it kill young grass? By the time, I should mow new grass at least three times.

Too much weed, every fall after overseeding, lawn looks much better, it looks ok till next summer, then weed grows like crazy and grass die. I apply Crabgrass Preventer & Weed Control every spring, also apply weed killer too. It only happens to backyard lawn, front yard lawn looks much better with less maintenance. It is headache to keep repairing backyard lawn. Maybe the land(quite some big trees were there 3 years ago and all those trees were removed) is not good for lawn.

Most recommend 3 cuttings before application of fertilizer or ‘weed ‘n feed’. If the weeds are taking over- have you done a soil test to see what’s going on? Are you in clay soil?

We just put in a new lawn this past late spring/early summer. We added a lot of soil amendments (several dump loads of topsoil and sheep/crap). It came in fine. We watered it 3x p/day until established then switched to 2x every third day for a longer duration. Deep, infrequent watering encourages grass roots to go deeper for water, improving their ability to crowd out weeds. A lot of things can be done to help lawns establish without bags of chemicals.

You want the best solution?

Skip the weed and feed and just go with Scott’s winterguard and get down to good applications if you’re growing cool season grass. One application sometime this month and another application going with a slightly heavier rate in early November.

You’re doing the right thing with the crabgrass preventer and spring but depending on where you’re located and what you’re using you might need to follow up with a second application in three months.

As for the weeds treat those by hand with something like Scott’s weed be gone even if you use the lawn attachment is far more effective than try to get those little granulars to stick to the weeds in order to kill them off.

Hope that helps and keep us posted.

For a lot of other good tips see my thread and this forum titled Ultimate Lawn Program For The Best Lawn On The Block.

Location C
Grass: Tall fescue

I applied weed killer one month ago, and over seeding TODAY (quite some big bare spots). There is still a lot of weed, but I just spread grass seed anyway. I don’t care whatever amount of grass seed can germinate, and I expect quite some grass seed will germinate within one week (based on previous year’s experience, good grass seed, straw, Scotts Turf Builder Starter Food for New Grass, watering twice a day)

I would like to apply WinterGuard Fall Weed & Feed around thanksgiving. Will it kill young grass? By the time, I should mow new grass at least three times.

Too much weed, every fall after overseeding, lawn looks much better, it looks ok till next summer, then weed grows like crazy and grass die. I apply Crabgrass Preventer & Weed Control every spring, also apply weed killer too. It only happens to backyard lawn, front yard lawn looks much better with less maintenance. It is headache to keep repairing backyard lawn. Maybe the land(quite some big trees were there 3 years ago and all those trees were removed) is not good for lawn.

Detailed information about all U.S. cities, counties, and zip codes on our site: City-data.com.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.